INSPECTION
Inspection · Vehicles built from Aug 2007
| INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
Measure the resistance according to the value(s) in the table below.

- Standard resistance:
Tester Connection
Condition
Specified Condition
6 (PL) - 2 (RB)
P position
Below 1 Ω
6 (PL) - 2 (RB)
Not in P position
10 kΩ or higher
1 (RL) - 2 (RB)
R position
Below 1 Ω
1 (RL) - 2 (RB)
Not in R position
10 kΩ or higher
9 (NL) - 2 (RB)
N position
Below 1 Ω
9 (NL) - 2 (RB)
Not in N position
10 kΩ or higher
7 (DL) - 2 (RB)
D position
Below 1 Ω
7 (DL) - 2 (RB)
Not in D position
10 kΩ or higher
3 (2L) - 2 (RB)
2 position
Below 1 Ω
3 (2L) - 2 (RB)
Not in 2 position
10 kΩ or higher
8 (LL) - 2 (RB)
L position
Below 1 Ω
8 (LL) - 2 (RB)
Not in L position
10 kΩ or higher
