Rain Sensor Circuit
Circuit diagnosis · Vehicles built from Nov 2005
DESCRIPTION
This circuit provides power to operate the rain sensor.The auto wiper system operates when the wiper switch is in the AUTO position.
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. CHECK WIRE HARNESS (ECU - SENSOR) |
![]() ![]() |
Disconnect the E66 ECU connector.
Disconnect the R5*1 or R7*2 sensor connector.
- HINT:
- *1: for LHD
- *2: for RHD
Measure the resistance of the wire harness side connectors.
- Standard resistance:
for LHD Tester Connection
Specified Condition
E66-8 (SIG) - R5-4 (SIG)
Below 1 Ω
E66-14 (PA1) - R5-3 (AUTO)
E66-25 (E) - R5-1 (ES)
- for RHD:
Tester Connection
Specified Condition
E66-8 (SIG) - R7-4 (SIG)
Below 1 Ω
E66-14 (PA1) - R7-3 (AUTO)
E66-25 (E) - R7-1 (ES)
|
|
||||
| OK | ||
| ||

