The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted
Circuit diagnosis · Vehicles built from Nov 2005
INSPECTION PROCEDURE
| 1. CHECK CELLULAR PHONE |
Check if the person on the other end of the phone line can be heard using a cellular phone.
- OK:
- Person can be heard.
|
|
||||
| OK | |
| 2. CHECK SETTINGS |
![]() ![]() |
On the screen that appears while talking, check if the volume level setting is low.
- OK:
- Level setting is not low.
|
|
||||
| OK | |
| 3. CHECK SETTINGS |
![]() ![]() |
Enter the "Handsfree Voice Quality Set" mode (Click here).
Check if the "Receive Voice Level" is set to "0".
- HINT:
- The receiver voice has 11 levels (-5 to +5) with increments of 3 db.
Check if the volume is set to the minimum or maximum level.
- HINT:
- When the volume is set to the minimum or maximum level, the sound may be distorted.
- OK:
- Voice level setting is normal.
|
|
||||
| OK | ||
| ||



