The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted
Circuit diagnosis · Vehicles built from Nov 2005
INSPECTION PROCEDURE
| 1. CHECK CELLULAR PHONE |
Check if the person on the other end of the phone can hear your voice properly.
- OK:
- Your voice can be heard correctly.
|
|
||||
| OK | |
| 2. CHECK SETTINGS |
![]() ![]() |
Check if the mute switch is ON.
- OK:
- Mute switch is not set to ON.
|
|
||||
| OK | |
| 3. CHECK SETTINGS |
![]() ![]() |
Enter the "Handsfree Voice Quality Set" mode (Click here).
Check if the "Send Voice Level" is set to "0".
- OK:
- The send voice level has 11 levels (-5 to +5) with increments of 3 db.
Check if the volume is set to the minimum or maximum level.
- HINT:
- When the volume is set to the minimum or maximum level, the sound may be distorted.
- OK:
- Voice level setting is normal.
|
|
||||
| OK | |
| 4. CHECK MICROPHONE (DISPLAY CHECK MODE) |
Enter the "MICROPHONE & VOICE RECOGNITION CHECK" mode (Click here).

When audio is input to the microphone, check if the microphone input level meter varies accordingly.
Push the recording switch and, while sitting in the driver seat, speak for approximately 5 seconds. When recording, check that the recording indicator illuminates.
Check that the recorded audio can be played back normally.
- OK:
- All check results are normal.
|
|
||||
| OK | ||
| ||


