INSTALLATION
Removal / installation · Vehicles built from Aug 2008
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 Aug 2007 – Jul 2008 from Aug 2008
| 1.
INSTALL YAW RATE SENSOR ASSEMBLY (w/ VSC) |
 |
- Install the yaw rate sensor with the 2 bolts.
-
Torque:
- 15 N*m{
148 kgf*cm
, 11 ft.*lbf
}
- NOTICE:
- Do not damage the yaw rate sensor.
- Make sure that the yaw rate sensor is installed securely.
Connect the yaw rate sensor connector.
| 2.
INSTALL DECELERATION SENSOR (w/o VSC) |
 |
- Install the deceleration sensor with the 2 bolts.
-
Torque:
- 15 N*m{
148 kgf*cm
, 11 ft.*lbf
}
- NOTICE:
- Do not damage the deceleration sensor.
- Make sure that the deceleration sensor is installed securely.
Connect the deceleration sensor connector.
| 3.
INSTALL YAW RATE SENSOR BRACKET |
 |
Install the bracket with the bolt.


-
Torque:
- 15 N*m{
148 kgf*cm
, 11 ft.*lbf
}
| 4.
INSTALL FRONT DOOR SCUFF PLATE LH
|
 |
- Attach the 10 claws to install the scuff plate.
| 5.
INSTALL FRONT SEAT ASSEMBLY LH |
 |
for Manual Seat:
Install the front seat LH (Click here).
for Power Seat:
Install the front seat LH (Click here).
| 6.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|
| 7.
PERFORM ZERO POINT CALIBRATION OF YAW RATE AND DECELERATION SENSOR (w/ VSC) |
 |
Perform the yaw rate and deceleration sensor zero point calibration (Click here).
| 8.
INSPECT YAW RATE SENSOR SIGNAL (w/ VSC) |
 |
Inspect the yaw rate sensor signal (Click here).
| 9.
INSPECT DECELERATION SENSOR SIGNAL (w/o VSC) |
 |
Inspect the deceleration sensor signal (Click here).