2005-2008 RAV4 · Service Manual BRAKE

INSTALLATION

Removal / installation · Vehicles built Nov 2005 – Dec 2006

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 Aug 2007 – Jul 2008 from Aug 2008


1. INSTALL YAW RATE SENSOR ASSEMBLY (w/ VSC)

  1. C127334
    Install the yaw rate sensor with the 2 bolts.

    Torque:
    14.5 N*m{ 148 kgf*cm , 11 ft.*lbf }

    NOTICE:
    1. Do not damage the yaw rate sensor.
    2. Make sure that the yaw rate sensor is installed securely.

  1. Connect the yaw rate sensor connector.


2. INSTALL DECELERATION SENSOR (w/o VSC)

  1. C127335
    Install the deceleration sensor with the 2 bolts.

    Torque:
    14.5 N*m{ 148 kgf*cm , 11 ft.*lbf }

    NOTICE:
    1. Do not damage the deceleration sensor.
    2. Make sure that the deceleration sensor is installed securely.

  1. Connect the deceleration sensor connector.


3. INSTALL YAW RATE SENSOR BRACKET
  1. Install the bracket with the bolt.

    Torque:
    14.5 N*m{ 148 kgf*cm , 11 ft.*lbf }


4. INSTALL FRONT DOOR SCUFF PLATE LH

  1. B129699
    Attach the 10 claws to install the scuff plate.


5. INSTALL FRONT SEAT ASSEMBLY LH
  1. for Manual Seat:
    Install the front seat LH (Click here).

  1. for Power Seat:
    Install the front seat LH (Click here).


6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

7. PERFORM ZERO POINT CALIBRATION OF YAW RATE AND DECELERATION SENSOR (w/ VSC)
  1. Perform the yaw rate and deceleration sensor zero point calibration (Click here).


8. INSPECT YAW RATE SENSOR SIGNAL (w/ VSC)
  1. Inspect the yaw rate sensor signal (Click here).


9. INSPECT DECELERATION SENSOR SIGNAL (w/o VSC)
  1. Inspect the deceleration sensor signal (Click here).

← INSPECTION (from Aug 2008)INSTALLATION (Jan 2007 – Jul 2007) →