INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT REAR DOOR WITH MOTOR LOCK ASSEMBLY LH |
for LHD, RHD (w/o Double Locking System):
Apply the battery voltage to the door lock motor and check the operation of the door lock motor.

- OK:
Measurement Condition
Specified Condition
Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)
Lock
Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)
Unlock
- If the result is not as specified, replace the door lock assembly.
for RHD (w/ Double Locking System):

Apply the battery voltage to the door lock motor and check the operation of the door lock motor.
- OK:
Measurement Condition
Specified Condition
Battery positive (+) → 2 (L)
Battery negative (-) → 1 (UL)
Lock
Battery positive (+) → 1 (UL)
Battery negative (-) → 2 (L)
Unlock
- If the result is not as specified, replace the door lock assembly.
| INSPECT REAR DOOR WITH MOTOR LOCK ASSEMBLY RH |
for LHD, RHD (w/o Double Locking System):
Apply the battery voltage to the door lock motor and check the operation of the door lock motor.

- OK:
Measurement Condition
Specified Condition
Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)
Lock
Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)
Unlock
- If the result is not as specified, replace the door lock assembly.
for RHD (w/ Double Locking System):

Apply the battery voltage to the door lock motor and check the operation of the door lock motor.
- OK:
Measurement Condition
Specified Condition
Battery positive (+) → 4 (L)
Battery negative (-) → 3 (UL)
Lock
Battery positive (+) → 3 (UL)
Battery negative (-) → 4 (L)
Unlock
- If the result is not as specified, replace the door lock assembly.
