2005-2008 RAV4 · Service Manual BRAKE

ON-VEHICLE INSPECTION

Inspection · Vehicles built Nov 2005 – Dec 2006

Versions by build date: Nov 2005 – Dec 2006 from Jan 2007


INSPECT BRAKE PEDAL LOAD SENSING SWITCH

HINT:
  1. Do not remove the brake pedal load sensing switch from the brake pedal support.
  2. When there is a malfunction in the brake pedal load sensing switch, replace the brake pedal support.

  1. Disconnect the brake pedal load sensing switch connector.

    C129075E01

    C129074E01

  1. Measure the resistance of the switch.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Brake pedal depressed
    Approx. 1 kΩ
    1 - 2
    Brake pedal released
    Approx. 213 Ω

    If the value is not as specified, replace the brake pedal support assembly (Click here).

← INSTALLATION (from Aug 2008)ON-VEHICLE INSPECTION (from Jan 2007) →