U0073/49 Control Module Communication Bus Off
Diagnostic trouble codes · Vehicles built Nov 2005 – Jul 2008
Also covers:
- U0105/41 Lost Communication with Fuel Injector Control Module
- U0121/42 Lost Communication with Anti-Lock Brake System (ABS) Control Module
Versions by build date: Nov 2005 – Jul 2008 from Aug 2008
DESCRIPTION
The power steering ECU receives signals from the ECM and the skid control ECU via the CAN communication system.| DTC No. |
DTC Detection Condition |
Trouble Area |
| U0073/49 |
Control Module Communication Bus Off |
CAN communication system |
| U0105/41 |
Lost Communication with Fuel Injector Control Module |
|
| U0121/42 |
Lost Communication with Anti-Lock Brake System (ABS) Control Module |
|
- HINT:
- When 2 or more DTCs starting with [U] are output simultaneously, inspect the connectors and wire harness of each ECU.
- If DTC U0105/41 is output, first erase the DTCs. Then turn the ignition switch from off to on (IG). If DTC U0105/41 is not output again, there is no malfunction.
- When 2 or more DTCs starting with [U] are output simultaneously, inspect the connectors and wire harness of each ECU.
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. RECONFIRM DTC |
Check for DTC.
- OK:
- DTC is not output.
|
|
||||
| NG | ||
| ||
