2005-2008 RAV4 · Service Manual STEERING

U0073/49 Control Module Communication Bus Off

Diagnostic trouble codes · Vehicles built from Aug 2008

Also covers:

Versions by build date: Nov 2005 – Jul 2008 from Aug 2008

DESCRIPTION

The power steering ECU receives signals from the ECM and the skid control ECU via the CAN communication system.
DTC No.
DTC Detection Condition
Trouble Area
U0073/49
Control Module Communication Bus Off
CAN communication system
U0100/41
Lost Communication with ECM/PCM "A"
  1. CAN communication system
  2. ECM
U0129/42
Lost Communication with Brake System Control Module
  1. CAN communication system
  2. Skid control ECU

HINT:
  1. When 2 or more DTCs starting with [U] are output simultaneously, inspect the connectors and wire harness of each ECU.
  2. If DTC U0100/41 is output, first erase the DTCs. Then turn the ignition switch from off to on (IG). If DTC U0100/41 is not output again, there is no malfunction.


INSPECTION PROCEDURE


1. RECONFIRM DTC
  1. Check for DTC.

    OK:
    DTC is not output.



OK
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
NG

GO TO CAN COMMUNICATION SYSTEM


← U0073/49 Control Module Communication Bus Off (+ U0105/41, U0121/42) (Nov 2005 – Jul 2008)EPS Warning Light Circuit (Nov 2005 – Jul 2008) →