INSTALLATION
Removal / installation · Vehicles built from Aug 2007
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007
| 1. INSTALL NAVIGATION ANTENNA ASSEMBLY |
![]() ![]() |
Attach the 3 clamps.
Install the navigation antenna with the 2 screws.
| 2. INSTALL UPPER INSTRUMENT PANEL |
Attach the 6 clips and 5 claws to install the instrument panel.
Connect the connectors and clamps.
Install the 2 bolts and 2 screws.


Connect the passenger airbag connector.
Install the 2 bolts to the passenger airbag.

- Torque:
- 20 N*m{ 204 kgf*cm , 15 ft.*lbf }
| 3. INSTALL FRONT PILLAR GARNISH LH |
for Long Body (Click here)
| 4. INSTALL FRONT PILLAR GARNISH RH |
for Long Body (Click here)
| 5. INSTALL INSTRUMENT PANEL REGISTER ASSEMBLY CENTER |
![]() ![]() |
Attach the 5 clips to install the instrument panel register.
| 6. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
![]() ![]() |
Attach the 2 hinges to install the door.
Attach the claw to the glove compartment door stopper.

While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.
| 7. INSTALL NAVIGATION RECEIVER ASSEMBLY |
Install the No. 1 radio bracket to the radio receiver with the 4 screws.

Install the No. 2 radio bracket to the radio receiver with the 4 screws.

Connect all connectors to install the radio receiver.
Install the radio receiver to attach the 4 claws.
Install the 4 screws.


| 8. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER |
![]() ![]() |
Connect the connector.
Attach the 3 clips and 3 claws to install the cluster finish panel.
| 9. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER |
![]() ![]() |
Connect the connector.
Attach the 3 clips and 3 claws to install the cluster finish panel.
| 10. INSTALL COMBINATION METER ASSEMBLY |
![]() ![]() |
Connect the connector.
Attach the 2 clips to install the combination meter.
Install the 2 screws.
| 11. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
![]() ![]() |
Attach the 4 clips and 6 claws to install the instrument cluster finish panel.
| 12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |







