2005-2008 RAV4 · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built Jan 2007 – Jul 2007

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


1. INSTALL NAVIGATION ANTENNA ASSEMBLY

B129896
  1. Attach the 3 clamps.

  1. Install the navigation antenna with the 2 screws.


2. INSTALL UPPER INSTRUMENT PANEL
  1. Attach the 6 clips and 5 claws to install the instrument panel.

  1. Connect the connectors and clamps.

  1. Install the 2 bolts and 2 screws.

    B129870

  1. Connect the passenger airbag connector.

  1. B129886
    Install the 2 bolts to the passenger airbag.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }


3. INSTALL FRONT PILLAR GARNISH LH
for Short Body (Click here)
for Long Body (Click here)

4. INSTALL FRONT PILLAR GARNISH RH
for Short Body (Click here)
for Long Body (Click here)

5. INSTALL INSTRUMENT PANEL REGISTER ASSEMBLY CENTER

B129890
  1. Attach the 5 clips to install the instrument panel register.


6. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

B129887
  1. Attach the 2 hinges to install the door.

  1. B129889E03
    Attach the claw to the glove compartment door stopper.

  1. While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.


7. INSTALL NAVIGATION RECEIVER ASSEMBLY

  1. B131479
    Install the No. 1 radio bracket to the radio receiver with the 4 screws.

  1. B131480
    Install the No. 2 radio bracket to the radio receiver with the 4 screws.

  1. Connect all connectors to install the radio receiver.

  1. Install the radio receiver to attach the 4 claws.

  1. Install the 4 screws.

    B131947


8. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER

B140787
  1. Connect the connector.

  1. Attach the 3 clips and 3 claws to install the cluster finish panel.


9. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER

B140788
  1. Connect the connector.

  1. Attach the 3 clips and 3 claws to install the cluster finish panel.


10. INSTALL COMBINATION METER ASSEMBLY

B129873
  1. Connect the connector.

  1. Attach the 2 clips to install the combination meter.

  1. Install the 2 screws.


11. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

B129872
  1. Attach the 4 clips and 6 claws to install the instrument cluster finish panel.


12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
← INSTALLATION (Nov 2005 – Dec 2006)INSTALLATION (from Aug 2007) →