REMOVAL
Removal / installation · Vehicles built from Aug 2007
| 1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY |
- HINT:
- Remove the automatic transaxle assembly (Click here).
| 2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY |
Using SST, hold the crankshaft.

- SST
- 09213-70011
(09213-70020)
09330-00021
Remove the 8 bolts, front spacer, drive plate and rear spacer.

- NOTICE:
- Do not reuse the bolts.
| 3. REMOVE ENGINE REAR OIL SEAL |
Using a knife, cut off the oil seal lip.

Using a screwdriver, pry out the oil seal.
- NOTICE:
- Be careful not to damage the crankshaft. Tape the screwdriver tip before use.
