INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1. INSTALL REAR FOG LIGHT ASSEMBLY (for Back Door Attached Type) |
![]() ![]() |
Connect the connector.
Install the rear fog light with the 2 screws.
| 2. INSTALL REAR FOG LIGHT ASSEMBLY LH (for Bumper Attached Type) |
Install the rear fog light with the 3 bolts.

| 3. INSTALL REAR BUMPER COVER (for Bumper Attached Type) |
Put protective tape under the quarter panel.

w/ License Light:
Install the 2 license plate lights (Click here).
Connect the license plate light connector.
w/ Fog Light:
Connect the 2 fog light connectors.
Attach the 12 claws to install the bumper cover.
Install the 9 screws and 7 clips.

| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |

