REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE REAR BUMPER COVER (for Bumper Attached Type) |
Remove the 9 screws and 7 clips.

w/ Rear Quarter Panel Mudguard:
Remove the rear quarter panel mudguard.
Put protective tape under the quarter panel.
Detach the 12 claws and remove the bumper cover.

w/ Fog Light:
Disconnect the 2 fog light connectors.
w/ License Light:
Disconnect the license plate light connector.
Remove the 2 license plate lights (Click here).
| 3. REMOVE REAR FOG LIGHT ASSEMBLY LH (for Bumper Attached Type) |
![]() ![]() |
Remove the 3 bolts and rear fog light.
| 4. REMOVE REAR FOG LIGHT ASSEMBLY (for Back Door Attached Type) |
![]() ![]() |
Remove the 2 screws and rear fog light.
Disconnect the connector.


