Home › ENGINE ยท 2AZ-FE › STARTING › ENTRY AND START SYSTEM

ENTRY AND START SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
Use the table below to help determine the causes of the problem symptom. The likely causes of the problem are indicated in descending order. Check each suspected area in order. Repair or replace faulty parts or perform adjustments as necessary.


Entry and Start 
Symptom
Suspected Area
See page
Power Source Mode does not Change
Engine Switch Indicator Circuit
Click here
Room Oscillator does not Recognize Key
Click here
Engine Switch
Click here
Electrical Key
Click here
ID Code Box
Click here
Main Body ECU
Click here
Harness or Connector
Click here
Engine does not Start
Push-button Start Function DTCs
Click here
Power Source Mode does not Change
Click here
Engine Immobiliser System
Click here
Steering Lock System
Click here
SFI System
Click here
Engine Switch
Click here
Park / Neutral Position Switch
Click here
Stop Light Switch
Click here
Main Body ECU
Click here
Harness or Connector
Click here