VEHICLE STABILITY CONTROL SYSTEM > Slip Indicator Light Remains ON |

| 1.PREPARE FOR INSPECTION |
Check that the following condition is satisfied.
| NEXT | |
| 2.CHECK CAN COMMUNICATION SYSTEM |
Check if a CAN communication system DTC is output (Click here).
| Result | Proceed to |
| DTC is not output. | A |
| DTC is output. | B |
|
| ||||
| A | |
| 3.CHECK SKID CONTROL ECU CONNECTOR |
Check if the skid control ECU connector is securely connected.
|
| ||||
| OK | |
| 4.INSPECT COMBINATION METER ASSEMBLY |
Inspect the combination meter (Click here).
|
| ||||
| OK | ||
| ||