WASHER NOZZLE > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT FENDER LINER LH |
![]() |
Using a screwdriver, remove the clip and fender liner retainer.
Remove the screw, nut and bolt.
Partially remove the fender liner.
| 3. REMOVE FRONT FENDER LINER RH |
| 4. REMOVE RADIATOR SUPPORT OPENING COVER |
![]() |
Remove the 9 clips and radiator support opening cover.
| 5. REMOVE FRONT BUMPER COVER |
w/o Under Guard:
Remove the front bumper cover (Click here).
w/ Under Guard:
Remove the front bumper cover (Click here).
w/ Hood Moulding:
Remove the front bumper cover (Click here).
| 6. REMOVE HEADLIGHT CLEANER HOSE |
w/o Under Guard:
![]() |
Disconnect the headlight washer hose from the headlight washer actuator.
Detach the 5 clamps and remove the hose from the front bumper.
w/ Under Guard:
![]() |
Disconnect the headlight washer hose from the headlight washer actuator.
Detach the 5 clamps and remove the hose from the front bumper.
w/ Hood Moulding:
![]() |
Disconnect the headlight washer hose from the headlight washer actuator.
Detach the 6 clamps and remove the hose from the front bumper.
| 7. REMOVE HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH |
![]() |
Extend the headlight cleaner washer nozzle.
![]() |
Detach the 2 claws and remove the headlight cleaner washer nozzle.
| 8. REMOVE HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH |
| 9. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH |
w/o Under Guard, w/ Under Guard:
![]() |
Remove the 2 screws.
![]() |
Detach the 2 claws and remove the headlight washer actuator sub-assembly.
w/ Hood Moulding:
![]() |
Remove the clamp as shown in the illustration.
![]() |
Pull down the headlight cleaner clamp and remove it.
Detach the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration.

![]() |
Detach the claw and remove the headlight cleaner clamp as shown in the illustration.
| 10. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH |