Home › Engine / Hybrid System › 2AR-FE COOLING › COOLING FAN MOTOR
RM30B0U _51 Engine / Hybrid System _009233 2AR-FE COOLING _0050392 COOLING FAN MOTOR A

2AR-FE COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL NO. 2 COOLING FAN MOTOR

a.

Install the No. 2 cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 2.INSTALL COOLING FAN MOTOR

a.

Install the cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 3.INSTALL NO. 2 FAN

NOTICE:

Do not switch the fan and No. 2 fan when installing them. Parts may be damaged if the cooling fans are installed in the wrong locations.


a.

Install the No. 2 fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 4.INSTALL FAN

NOTICE:

Do not switch the fan and No. 2 fan when installing them. Parts may be damaged if the cooling fans are installed in the wrong locations.


a.

Install the fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 6.INSTALL FAN SHROUD WITH COOLING FAN