1.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
2.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
3.REMOVE ECU INTEGRATION BOX RH (w/o Bracket)
Disconnect each connector and detach the clamp.
Remove the 2 nuts, bolt and ECU integration box RH.
4.REMOVE CLEARANCE WARNING ECU ASSEMBLY (w/o Bracket)
Detach the 2 claws and remove the clearance warning ECU assembly.
5.REMOVE CLEARANCE WARNING ECU ASSEMBLY (w/ Bracket)
Disconnect the connector.
Remove the nut and clearance warning ECU assembly.