A bolt without a torque specification is shown in the standard bolt chart.
1.INSTALL CLEARANCE WARNING ECU ASSEMBLY (w/ Bracket)
Install the clearance warning ECU assembly with the nut.
Connect the connector.
2.INSTALL CLEARANCE WARNING ECU ASSEMBLY (w/o Bracket)
Attach the 2 claws to install the clearance warning ECU assembly.
3.INSTALL ECU INTEGRATION BOX RH (w/o Bracket)
Install the ECU integration box RH with the 2 nuts and bolt.
Connect each connector and attach the clamp.
4.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
5.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY