Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR SPOILER
RM30B0U _59 Vehicle Exterior _009441 EXTERIOR PANELS / TRIM _0051129 REAR SPOILER A

EXTERIOR PANELS / TRIM  REAR SPOILER  REMOVAL  


PROCEDURE

Hide 1.REMOVE BACK DOOR CENTER GARNISH

Hide 2.REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

Hide 3.REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)

HINT:

Use the same procedure described for the LH side.


Hide 4.REMOVE BACK DOOR GLASS CHANNEL LH

a.
B335682
1.188,0.635 1.188,0.229 1.188,0.229 1.573,0.229 true 1.604,0.156 1.781,0.365 0.177,0.208 10 *1
*1 Double-sided Tape


Remove the clip.


b.

Detach the double-sided tape to remove the back door glass channel LH.


Hide 5.REMOVE BACK DOOR GLASS CHANNEL RH

HINT:

Use the same procedure described for the LH side.


Hide 6.REMOVE REAR SPOILER

HINT:

When removing the rear spoiler, heat the vehicle body and rear spoiler using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Rear Spoiler 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body or rear spoiler excessively.


a.
B335686
2.177,0.656 2.188,0.656 false
V100135

Connector
V100136

Clamp


Disconnect the connector and detach the clamp.


b.
B335683

Remove the 4 nuts.


c.

Using a heat light, heat the vehicle body and rear spoiler.


d.
B335684
0.99,2.281 0.99,2.042 0.99,2.042 1.25,2.042 true 2.594,0.719 2.594,0.427 2.594,0.427 2.854,0.427 true 2.771,0.823 2.771,0.708 2.771,0.708 2.958,0.708 true 1.219,1.313 1.219,0.948 1.219,0.948 1.396,0.948 true 0.99,1.563 0.99,1.75 0.99,1.75 1.208,1.75 true 0.563,1.417 0.563,1.083 0.563,1.083 0.302,1.083 true 2.656,0.927 3.042,0.99 3.042,0.99 2.75,1.073 true 2.125,1.292 2.031,1.448 2.031,1.448 1.844,1.385 true 2.885,0.354 3.198,0.51 0.313,0.156 10 *1 1.281,1.969 1.594,2.125 0.313,0.156 10 *2 2.979,0.635 3.156,0.823 0.177,0.188 10 *3 1.406,0.865 1.583,1.052 0.177,0.188 10 *3 1.24,1.688 1.417,1.875 0.177,0.188 10 *3 0.135,1.01 0.313,1.198 0.177,0.188 10 *3 3.052,0.906 3.229,1.094 0.177,0.188 10 *3 1.979,1.458 2.156,1.646 0.177,0.188 10 *3
*1 Protective Tape
*2 Wooden Block
*3 Double-sided Tape


Put protective tape around the rear spoiler.


e.

Insert piano wire between the vehicle body and rear spoiler.


f.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


g.

Pull the piano wire and scrape off the double-sided tape.

NOTICE:

Be careful not to damage the vehicle body.



h.

Detach the 5 clips and remove the rear spoiler.