1.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
2.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
3.REMOVE ECU INTEGRATION BOX RH (w/o Bracket)
Disconnect each connector and detach the clamp.
Remove the 2 nuts, bolt and ECU integration box RH.
4.REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/o Bracket)
Detach the 2 claws and remove the certification ECU (smart key ECU assembly).
5.REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/ Bracket)
Disconnect the 3 connectors.
Remove the nut, bolt and certification ECU (smart key ECU assembly).