Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › CERTIFICATION ECU
RM30B0U _58 Vehicle Interior _009405 THEFT DETERRENT / KEYLESS ENTRY _0051166 CERTIFICATION ECU A

THEFT DETERRENT / KEYLESS ENTRY  CERTIFICATION ECU  INSTALLATION  


PROCEDURE

Hide 1.INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/ Bracket)

a.

Install the certification ECU (smart key ECU assembly) with the nut and bolt.

Torque:
Nut : 7.5 N*m (76 kgf*cm, 66 in.*lbf)
Bolt : 12 N*m (122 kgf*cm, 9 ft.*lbf)


b.

Connect the 3 connectors.


Hide 2.INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/o Bracket)

a.

Attach the 2 claws to install the certification ECU (smart key ECU assembly).


Hide 3.INSTALL ECU INTEGRATION BOX RH (w/o Bracket)

a.

Install the ECU integration box RH with the 2 nuts and bolt.

Torque:
Nut : 5.5 N*m (56 kgf*cm, 49 in.*lbf)
Bolt : 11.5 N*m (117 kgf*cm, 8 ft.*lbf)


b.

Connect each connector and attach the clamp.


Hide 4.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

Hide 5.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY