Wear protective gloves. Sharp areas on the parts may injure your hands.
A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
1.INSTALL FRONT SEATBACK HEATER ASSEMBLY LH
Set the front seatback heater assembly LH on the separate type front seatback cover.
Using a tacker, install the front seatback heater assembly LH to the separate type front seatback cover with 14 new tack pins as shown in the illustration.
Do not substitute other metal parts for tack pins.
2.INSTALL SEPARATE TYPE FRONT SEATBACK COVER
3.INSTALL FRONT SEAT HEADREST SUPPORT
4.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
5.INSTALL FRONT INNER SEAT CUSHION SHIELD LH
6.INSTALL FRONT SEAT CUSHION SHIELD LH
7.INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD LH
8.INSTALL FRONT SEAT ASSEMBLY LH
9.INSPECT SEAT HEATER SYSTEM