Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT PASSENGER AIRBAG ASSEMBLY
RM30B0U _58 Vehicle Interior _010074 SUPPLEMENTAL RESTRAINT SYSTEMS _0055013 FRONT PASSENGER AIRBAG ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT PASSENGER AIRBAG ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 1.INSTALL NO. 2 INSTRUMENT PANEL WIRE

a.
B341176
2.135,2.948 2.552,2.615 true 1.979,2.906 2.292,3.063 0.313,0.156 10 false *1
*1 Connector Lock


Connect the 3 airbag connectors to the instrument panel passenger without door airbag assembly.

NOTICE:

When connecting any airbag connector, take care not to damage the airbag wire harness.



b.

Push in the 3 connector locks to install the 3 airbag connectors.


c.

Attach the connector clamp to install the No. 2 instrument panel wire to the instrument panel passenger without door airbag assembly.


Hide 2.INSTALL INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY

a.

Attach the 3 rear hooks of the instrument panel passenger without door airbag assembly to the rear of the airbag door.


b.

Push in the instrument panel passenger without door airbag assembly to attach the 3 front hooks to the front of the airbag door.


c.

Install the instrument panel passenger without door airbag assembly with the 2 screws.


Hide 3.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION