The jam protection function operates within a specified range during the manual up or auto up operation.
If the front power window regulator motor assembly LH has been replaced with a new one, initialize the power window control system.
Initialize the front power window regulator motor assembly LH.
| Proceed to |
|---|
| NEXT |
NEXT
Check if the power window auto up and down function operates normally.
| Proceed to |
|---|
| Driver door auto up and down function is normal |
| Driver door auto up and down function is not normal |
Driver door auto up and down function is normal
Driver door auto up and down function is not normal
Check if the jam protection function operates normally for the driver door power window.
The jam protection function will not operate within 4 mm (0.157 in.) of the fully closed position.
| Proceed to |
|---|
| Jam protection function operates normally |
| Jam protection function does not operate normally |
Jam protection function operates normally
Jam protection function does not operate normally