When an internal malfunction occurs in the certification ECU (smart key ECU assembly), the certification ECU (smart key ECU assembly) stores this DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| B2779 | Engine Starter Communication Malfunction | An internal malfunction occurs in the certification ECU (smart key ECU assembly). | Certification ECU (smart key ECU assembly) | DTC output confirmation operation:
Always |
| Vehicle Condition when Malfunction Detected | Fail-safe Operation when Malfunction Detected |
|---|---|
| - | - |
| DTC No. | Data List and Active Test |
|---|---|
| B2779 | - |
Before replacing the certification ECU (smart key ECU assembly), refer to the registration.
After repair, confirm that no DTCs are output by performing "DTC Output Confirmation Operation."
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Check for DTCs.
| Proceed to |
|---|
| DTC B2779 is not output |
| DTC B2779 is output |
DTC B2779 is not output
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
DTC B2779 is output