Home › Brake › PARKING BRAKE › PARKING BRAKE LEVER
RM30B0U _54 Brake _011370 PARKING BRAKE _0059597 PARKING BRAKE LEVER A

PARKING BRAKE  PARKING BRAKE LEVER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL PARKING BRAKE SWITCH ASSEMBLY

Hide 2.CONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY

a.

Pass the No. 1 parking brake cable assembly through the parking brake lever.


b.
C278492

Bend the parking brake lever claw.


Hide 3.INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY

a.

Install the parking brake lever (with the No. 1 parking brake cable) with the 2 bolts.

Torque:
14.5 N*m (148 kgf*cm, 11 ft.*lbf)


b.

Connect the No. 1 parking brake cable to the parking brake equalizer.


c.

Temporarily install the No. 1 cable adjusting nut and lock nut.


d.

Connect the parking brake switch connector.


Hide 4.CHECK PARKING BRAKE LEVER TRAVEL

Hide 5.ADJUST PARKING BRAKE LEVER TRAVEL

Hide 6.INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET

a.

Install the No. 2 console box mounting bracket with the 4 bolts.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)


Hide 7.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY