1.INSTALL NO. 1 POWER OUTLET SOCKET COVER
Attach the 2 claws to install the No. 1 power outlet socket cover.
Use the same procedure to install the other No. 1 power outlet socket cover.
2.INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY
Attach the claw to install the No. 1 power outlet socket assembly.
Use the same procedure to install the other No. 1 power outlet socket assembly.
3.INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
4.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY