Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER › from 2013.11
RM30B0U _56 Audio / Visual / Telematics _009403 AUDIO / VIDEO _0058384 RADIO RECEIVER A

AUDIO / VIDEO  RADIO RECEIVER  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 3.REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Hide 4.REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 5.REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 6.REMOVE TELLTALE LIGHT ASSEMBLY

Hide 7.REMOVE RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)

a.
E288826

Remove the 4 bolts.


b.

Detach the 4 clips and remove the radio receiver assembly with bracket.


c.

Disconnect each connector.


Hide 8.REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type, w/ Satellite Radio)

a.
E288827

Remove the 4 bolts.


b.

Detach the 4 clips and remove the radio and display receiver assembly with bracket.


c.

Disconnect each connector.


Hide 9.REMOVE WIRE HARNESS (w/ Satellite Radio)

Hide 10.REMOVE NO. 1 RADIO BRACKET

E288824
0.073,0.208 0.385,0.365 0.313,0.156 10 false *A 2.448,0.219 2.76,0.375 0.313,0.156 10 false *B 4.563,0.208 4.875,0.365 0.313,0.156 10 false *C
*A for Radio Receiver Type *B for Radio and Display Type
*C w/ Satellite Radio - -


a.

for Radio Receiver Type, for Radio and Display Type:

i.

Remove the 3 screws and No. 1 radio bracket.



b.

w/ Satellite Radio:

i.

Remove the 5 screws and No. 1 radio bracket.



Hide 11.REMOVE NO. 2 RADIO BRACKET

E288825
0.146,0.271 0.458,0.427 0.313,0.156 10 false *A 2.375,0.281 2.688,0.438 0.313,0.156 10 false *B 4.646,0.333 4.958,0.49 0.313,0.156 10 false *C
*A for Radio Receiver Type *B for Radio and Display Type
*C w/ Satellite Radio - -


a.

for Radio Receiver Type, for Radio and Display Type:

i.

Remove the 3 screws and No. 2 radio bracket.



b.

w/ Satellite Radio:

i.

Remove the 5 screws and No. 2 radio bracket.



Hide 12.REMOVE STEREO COMPONENT TUNER ASSEMBLY (w/ Satellite Radio)