89413B
1.INSTALL TRANSMISSION REVOLUTION SENSOR (NOUT)
Coat a new O-ring with CVT Fluid TC and install it to the transmission revolution sensor (NOUT).
Install the transmission revolution sensor (NOUT) with the bolt.
Connect the transmission revolution sensor connector.
89413B
2.INSTALL TRANSMISSION REVOLUTION SENSOR (NIN)
Coat a new O-ring with CVT Fluid TC and install it to the transmission revolution sensor (NIN).
Install the transmission revolution sensor (NIN) with the bolt.
Connect the transmission revolution sensor connector.
89413B
3.INSTALL TRANSMISSION REVOLUTION SENSOR (NT)
Coat a new O-ring with CVT Fluid TC and install it to the transmission revolution sensor (NT).
Install the transmission revolution sensor (NT) with the bolt.
Connect the transmission revolution sensor connector.
74414B
4.INSTALL BATTERY BRACKET REINFORCEMENT
74411B
5.INSTALL FRONT BATTERY BRACKET
74431
6.INSTALL BATTERY TRAY
28800
7.INSTALL BATTERY
74404A
8.INSTALL BATTERY CLAMP SUB-ASSEMBLY
9.INSTALL AIR CLEANER CASE SUB-ASSEMBLY
10.INSTALL AIR CLEANER FILTER ELEMENT
17705
11.INSTALL AIR CLEANER CAP SUB-ASSEMBLY
12.CONNECT CABLE TO POSITIVE BATTERY TERMINAL
13.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
11212
14.INSTALL NO. 2 CYLINDER HEAD COVER