Home › Engine / Hybrid System › 2AR-FE LUBRICATION › ENGINE OIL COOLER(w/ Oil Cooler)
RM3090E _51 Engine / Hybrid System _008401 2AR-FE LUBRICATION _0047980 ENGINE OIL COOLER(w/ Oil Cooler) A

2AR-FE LUBRICATION  ENGINE OIL COOLER(w/ Oil Cooler)  REMOVAL  


PROCEDURE

Hide 25051 1.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

Hide 15710 4.REMOVE OIL COOLER ASSEMBLY

a.
A207599
1.594,1.052 1.958,0.781 1.958,0.781 2.188,0.781 false 1.479,1.354 2.031,1.646 2.031,1.646 2.24,1.646 false 2.229,0.708 2.438,0.875 0.208,0.167 10 *1 2.271,1.563 2.583,1.76 0.313,0.198 10 *2
*1 Union Bolt
*2 Seal Washer


Remove the nut, union bolt, seal washer and oil cooler assembly.


b.

Remove the 3 gaskets from the oil cooler assembly.