Home › Drivetrain › U660F AUTOMATIC TRANSMISSION / TRANSAXLE › DIFFERENTIAL OIL SEAL(for RH Side)
RM3090E _52 Drivetrain _008436 U660F AUTOMATIC TRANSMISSION / TRANSAXLE _0049585 DIFFERENTIAL OIL SEAL(for RH Side) A

U660F AUTOMATIC TRANSMISSION / TRANSAXLE  DIFFERENTIAL OIL SEAL(for RH Side)  REPLACEMENT  


PROCEDURE

Hide 36100 2.REMOVE TRANSFER ASSEMBLY

Hide 31105H 3.REMOVE TRANSAXLE CASE OIL SEAL RH

a.
C139836C01
2.365,1.156 1.49,0.24 1.49,0.24 1.323,0.24 false 1.146,0.156 1.302,0.323 0.156,0.167 10 *a
*a Protective Tape


Outer:

Using a screwdriver with its tip wrapped with vinyl tape, pry out the transaxle case oil seal RH.

NOTICE:

Be careful not to damage the housing.


HINT:

Tape the screwdriver tip before use.



b.
C139837N05
1.385,1.01 0.865,1.01 false 2.854,2.135 2.76,2.135 2.76,2.135 2.615,2.802 true 0.5,0.917 0.813,1.073 0.313,0.156 10 SST 2.896,2.052 3.208,2.208 0.313,0.156 10 SST

Inner:

Using SST, tap out the transaxle case oil seal RH.

SST
09308-00010  

NOTICE:

Be careful not to damage the housing.



Hide 31105H 4.INSTALL TRANSAXLE CASE OIL SEAL RH

a.
C188860N03
2.708,1.208 3,0.844 3,0.844 2.813,1.438 true 3.031,0.74 3.333,0.917 0.302,0.177 10 SST

Inner:

i.

Coat the lip of a new transaxle case oil RH seal with MP grease.


ii.

Using SST and a hammer, tap in the transaxle case oil seal RH.

SST
09950-60010  09950-70010  (09951-00410, 09951-07200)

Standard depth:

21.5 to 22.5 mm (0.847 to 0.885 in.)




b.
C188861N02
3.25,1.667 3.156,2.344 3.156,2.344 3.01,2.083 true 1.229,1.854 1.229,2.427 1.229,2.427 0.896,2.115 true 2.979,2.375 3.292,2.552 0.313,0.177 10 SST 1.083,2.458 1.396,2.635 0.313,0.177 10 SST

Outer:

i.

Coat the lip of a new transaxle case oil seal with MP grease.


ii.

Using SST and a hammer, tap in the transaxle case oil seal RH.

SST
09649-17010  09950-70010  (09951-07200)

Standard depth:

5.5 to 6.5 mm (0.217 to 0.255 in.)


NOTICE:

Make sure that the transaxle oil seal RH is installed in the correct direction.




Hide 36100 5.INSTALL TRANSFER ASSEMBLY