Home › Power Source / Network › 3ZR-FAE BATTERY / CHARGING › CHARGING SYSTEM
RM3090E _57 Power Source / Network _008394 3ZR-FAE BATTERY / CHARGING _0046852 CHARGING SYSTEM J

3ZR-FAE BATTERY / CHARGING  CHARGING SYSTEM  Noise Occurs from Generator while Engine is Running  


PROCEDURE

1.CHECK LOOSENESS OF V-RIBBED BELT
a.

Check the tension of the V-ribbed belt by pushing it down with a finger.

OK:

The tension of the V-ribbed belt is sufficient.



Result:
OK
NG



OK

2.CHECK V-RIBBED BELT FOR WEAR

NG

2.CHECK V-RIBBED BELT FOR WEAR
a.

Check the V-ribbed belt for wear.

OK:

The V-ribbed belt is not worn.



Result:
OK
NG



OK

3.CHECK GENERATOR PULLEY WITH CLUTCH FOR WEAR

NG

3.CHECK GENERATOR PULLEY WITH CLUTCH FOR WEAR
a.

Check the generator pulley with clutch grooves for wear or other defects.

OK:

The generator pulley with clutch grooves is not damaged.


Result:
OK
NG




OK

4.CHECK FOR NOISE WHILE GENERATOR PULLEY WITH CLUTCH IS OPERATING

NG

REPLACE GENERATOR PULLEY WITH CLUTCH

4.CHECK FOR NOISE WHILE GENERATOR PULLEY WITH CLUTCH IS OPERATING
a.

Perform a road test and check if noise occurs when decelerating.

OK:

Noise does not occur.


Result:
OK
NG




OK

NG

REPLACE GENERATOR PULLEY WITH CLUTCH