Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Manual Seat)
RM3090E _58 Vehicle Interior _008433 SEAT _0049768 FRONT SEAT ASSEMBLY(for Manual Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Manual Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL FRONT SEAT ASSEMBLY LH

a.

Place the front seat assembly LH in the cabin.

NOTICE:
·

Before placing the seat in the vehicle, operate the seat track adjusting handle to slide the seat track to the center position.


·

Be careful not to damage the vehicle body.




b.
B339906C01
1.063,1.677 1.333,0.74 true 1.75,1.917 1.99,0.979 true 1.896,3.521 2,4 true 2.813,3.417 3.083,3.167 true 0.75,3.281 0.438,3.073 true 0.094,0.094 0.406,0.25 0.313,0.156 10 true *A 0.167,2.344 0.479,2.5 0.313,0.156 10 false *B 0.938,1.677 1.25,1.833 0.313,0.156 10 false *C 0.26,2.958 0.573,3.115 0.313,0.156 10 false *D 1.938,4.021 2.25,4.177 0.313,0.156 10 true *C 1.677,1.927 1.99,2.083 0.313,0.156 10 false *D 3.094,3.063 3.406,3.219 0.313,0.156 10 true *E
*A for Driver Side
*B for Front Passenger Side
*C w/ Seat Heater System
*D w/ Front Seat Side Airbag
*E w/ Seat Cushion Airbag


Attach the clamp to connect the connector of the front seat inner belt assembly LH.


c.

w/ Seat Heater System:

Connect the connector of the seat heater.


d.

w/ Front Seat Side Airbag:

Connect the connector of the front seat airbag assembly LH.


e.

for Front Passenger Side, w/ Seat Cushion Airbag:

Connect the connector of the front seat airbag sub-assembly RH.


f.

Temporarily install the front seat assembly with the 4 bolts.


g.

Operate the seat track adjusting handle to move the seat to the rearmost position.


h.
B338226

Tighten the 2 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


i.

Operate the seat track adjusting handle to move the seat to the foremost position.


j.
B338225

Tighten the 2 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


k.

During sliding operation of the front seat, check that the left and right adjusters move together smoothly and lock simultaneously. If the seat adjusters do not lock simultaneously, loosen the seat mounting bolts to adjust the adjuster position.


Hide 72138 2.INSTALL REAR OUTER SEAT TRACK BRACKET COVER LH

a.
B339922C01
1.698,0.656 1.729,0.719 false
V100135

First
V100136

Second


Attach the 2 claws to install the rear outer seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.


Hide 72158 3.INSTALL REAR INNER SEAT TRACK BRACKET COVER LH

a.
B339923C01
1.521,0.458 1.615,0.552 false
V100135

First
V100136

Second


Attach the 2 claws to install the rear inner seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.


Hide 72124 4.INSTALL FRONT OUTER SEAT TRACK BRACKET COVER LH

a.

Operate the seat track adjusting handle to move the seat to the rearmost position.


b.
B339924C01
1.542,0.552 1.469,0.667 false
V100135

First
V100136

Second


Attach the 2 claws to install the front outer seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.


Hide 72128A 5.INSTALL FRONT INNER SEAT TRACK BRACKET COVER LH

a.
B339925C01
1.708,0.677 1.583,0.76 false 1.688,0.698 1.563,0.781 false
V100135

First
V100136

Second


Attach the 2 claws to install the front inner seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.


Hide 71910A 6.INSTALL FRONT SEAT HEADREST ASSEMBLY

a.

Install the front seat headrest assembly.


Hide 7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 9.INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)