Home › Engine / Hybrid System › 3ZR-FAE FUEL › FUEL FILTER
RM3090E _51 Engine / Hybrid System _008388 3ZR-FAE FUEL _0049891 FUEL FILTER A

3ZR-FAE FUEL  FUEL FILTER  REPLACEMENT  


CAUTION / NOTICE / HINT

NOTICE:

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click hereEngine / Hybrid System>3ZR-FAE FUEL>FUEL SYSTEM>PRECAUTION


PROCEDURE

Hide 1.REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP

Hide 77131C 2.REMOVE NO. 1 FUEL SUB-TANK

Hide 77174 3.REMOVE NO. 1 FUEL SUCTION SUPPORT

Hide 5.REMOVE FUEL FILTER ASSEMBLY

a.
A195883

Using a screwdriver with its tip wrapped in protective tape, remove the fuel pressure regulator assembly from the fuel filter assembly.

NOTICE:

Slowly pull out the fuel pressure regulator assembly because the O-ring is firmly installed between the fuel pressure regulator assembly and fuel filter assembly.



b.

Remove the 2 O-rings.


Hide 6.INSTALL FUEL FILTER ASSEMBLY

a.
A195884C01
0.754,1.653 0.919,1.813 0.166,0.16 10 *1 0.833,1.131 0.833,1.64 false 1.758,1.41 1.758,1.537 1.758,1.537 0.833,1.537 false
*1 New O-Ring


Apply a light coat of gasoline to 2 new O-rings and install them to the fuel pressure regulator assembly.


b.

Install the fuel pressure regulator assembly to the fuel filter assembly.


Hide 23221 7.INSTALL FUEL PUMP

Hide 77174 8.INSTALL NO. 1 FUEL SUCTION SUPPORT

Hide 77131C 9.INSTALL NO. 1 FUEL SUB-TANK

Hide 10.INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP