51441
1.REMOVE NO. 1 ENGINE UNDER COVER
2.DRAIN MANUAL TRANSAXLE OIL
| *1 | Manual Transaxle Filler Plug |
| *2 | Manual Transaxle Drain Plug |
Remove the manual transaxle filler plug and gasket.
Remove the manual transaxle drain plug and gasket to drain the manual transaxle oil.
Install a new gasket and the drain plug.
3.ADD MANUAL TRANSAXLE OIL
| *a | 0 to 5 mm (0 to 0.197 in.) |
Add oil until the oil level is within 0 to 5 mm (0 to 0.197 in.) from the bottom of the manual transaxle filler plug opening.
"TOYOTA Genuine Manual Transmission Gear Oil LV" or "API GL-4 and SAE 75W"
2.4 liters (2.5 US qts, 2.1 IMP. qts)
Install a new gasket and the manual transaxle filler plug.
When adding transaxle oil, make sure the vehicle is level.
An excessively large or small amount of oil may cause problems.
After adding oil, drive the vehicle and recheck the oil level.
4.INSPECT FOR OIL LEAK
51441
5.INSTALL NO. 1 ENGINE UNDER COVER