Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY
RM3090E _58 Vehicle Interior _008788 SEAT BELT _0050328 REAR SEAT INNER BELT ASSEMBLY A

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 73380D 1.INSTALL REAR SEAT INNER BELT ASSEMBLY RH

a.

w/o Seat Belt Warning System:

i.

Install the rear seat inner belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)



b.

w/ Seat Belt Warning System:

i.

Install the rear seat inner belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


ii.

Attach the 2 wire harness clamps.



Hide 73330C 2.INSTALL REAR CENTER SEAT LAP TYPE BELT ASSEMBLY RH

a.
B334903C01
2.75,3 2.354,2.583 true 2.75,3 2.01,2.781 true 2.771,2.927 3.083,3.125 0.313,0.198 10 *1
*1 Protruding Part


w/o Seat Belt Warning System:

i.

Install the rear center seat lap type belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

The anchor part of the rear center seat lap type belt assembly RH must not overlap the protruding part.




b.
B334905C01
2.302,2.76 3,3 true 2.646,2.563 3,3 true 3.031,2.958 3.344,3.156 0.313,0.198 10 *1
*1 Protruding Part


w/ Seat Belt Warning System:

i.

Install the rear center seat lap type belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

The anchor part of the rear center seat lap type belt assembly RH must not overlap the protruding part.



ii.

Attach the wire harness clamp.



Hide 3.INSTALL REAR SEAT ASSEMBLY RH

Hide 73380D 4.INSTALL REAR SEAT INNER BELT ASSEMBLY LH

a.

w/o Seat Belt Warning System:

i.

Install the rear seat inner belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)



b.

w/ Seat Belt Warning System:

i.

Install the rear seat inner belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


ii.

Attach the 2 wire harness clamps.



Hide 73340C 5.INSTALL REAR CENTER SEAT LAP TYPE BELT ASSEMBLY LH

a.
B334899C01
2.26,2.563 2.552,3 true 2.563,3.031 2.875,3.229 0.313,0.198 10 *1
*1 Protruding Part


Pass the rear center seat lap type belt assembly LH through the rubber band of the separate type rear seat cushion cover.


b.

Install the rear center seat lap type belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

The anchor part of the rear center seat lap type belt assembly LH must not overlap the protruding part.



Hide 6.INSTALL REAR SEAT ASSEMBLY LH