Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › 2012.12–2013.11
RM3090E _56 Audio / Visual / Telematics _008775 AUDIO / VIDEO _0048748 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Speaker Circuit  


DESCRIPTION

The sound signals amplified by the radio and display receiver assembly are sent to the speakers from the radio and display receiver assembly via the speaker circuit.

If there is a short in a speaker circuit, the radio and display receiver assembly detects it and stops output to the speakers.

Thus sound cannot be heard from the speakers even if there is no malfunction in the radio and display receiver assembly or speakers.

WIRING DIAGRAM

E226481E23
5.646,7.531 6.875,8.135 1.229,0.604 10 false Radio and Display Receiver Assembly 2.458,2.344 4.688,2.521 2.229,0.177 10 false Front No. 2 Speaker Assembly RH 5.531,0.729 5.708,0.885 0.177,0.156 10 false 1 4.563,0.844 4.667,1 0.104,0.156 10 false 4 4.563,1.708 4.667,1.865 0.104,0.156 10 false 2 2.292,0.833 2.396,0.99 0.104,0.156 10 false 3 2.292,1.719 2.396,1.875 0.104,0.156 10 false 1 2.49,0.844 2.594,1 0.104,0.156 10 false + 2.479,1.719 2.583,1.875 0.104,0.156 10 false - 5.427,0.948 5.802,1.094 0.375,0.146 10 false G141 2.448,2.198 2.708,2.354 0.26,0.156 10 false H1 0.469,1.344 1.76,1.719 1.292,0.375 10 false Front No. 1 Speaker Assembly RH 0.469,1.135 0.729,1.292 0.26,0.156 10 false I1 2.469,4.323 4.615,4.531 2.146,0.208 10 false Front No. 2 Speaker Assembly LH 4.531,2.813 4.635,2.969 0.104,0.156 10 false 4 4.542,3.677 4.646,3.833 0.104,0.156 10 false 2 2.281,2.823 2.385,2.979 0.104,0.156 10 false 3 2.313,3.698 2.417,3.854 0.104,0.156 10 false 1 2.49,2.833 2.594,2.99 0.104,0.156 10 false + 2.49,3.677 2.594,3.833 0.104,0.156 10 false - 4.073,3.708 4.479,3.885 0.406,0.177 10 false TWL- 2.458,4.167 2.719,4.323 0.26,0.156 10 false H3 0.469,3.281 1.74,3.667 1.271,0.385 10 false Front No. 1 Speaker Assembly LH 0.479,3.115 0.74,3.271 0.26,0.156 10 false J1 0.802,5.094 1.708,5.479 0.906,0.385 10 false Rear Speaker Assembly RH 0.802,4.906 1.063,5.063 0.26,0.156 10 false K2 0.792,6.563 1.698,6.917 0.906,0.354 10 false Rear Speaker Assembly LH 0.802,6.365 1.063,6.521 0.26,0.156 10 false L2 5.417,1.823 5.792,1.979 0.375,0.156 10 false G141 5.427,2.927 5.844,3.083 0.417,0.156 10 false G141 5.427,3.802 5.833,3.958 0.406,0.156 10 false G141 5.406,4.844 5.813,5 0.406,0.156 10 false G142 5.854,0.969 6.146,1.125 0.292,0.156 10 false FR+ 5.865,1.844 6.125,2 0.26,0.156 10 false FR- 5.844,2.927 6.208,3.135 0.365,0.208 10 false FL+ 5.833,3.802 6.094,3.958 0.26,0.156 10 false FL- 5.854,4.854 6.156,5.01 0.302,0.156 10 false RR+ 5.844,5.479 6.125,5.635 0.281,0.156 10 false RR- 5.833,6.365 6.115,6.521 0.281,0.156 10 false RL+ 5.844,7.01 6.104,7.167 0.26,0.156 10 false RL- 5.542,6.781 5.75,6.938 0.208,0.156 10 false 6 5.552,6.156 5.781,6.313 0.229,0.156 10 false 2 5.552,5.271 5.781,5.438 0.229,0.167 10 false 3 5.552,4.635 5.719,4.792 0.167,0.156 10 false 1 5.542,3.573 5.646,3.729 0.104,0.156 10 false 6 5.542,2.719 5.74,2.885 0.198,0.167 10 false 2 5.531,1.615 5.74,1.771 0.208,0.156 10 false 5 1.771,1.063 1.875,1.219 0.104,0.156 10 false 1 1.781,1.75 1.885,1.906 0.104,0.156 10 false 2 1.792,3.042 1.896,3.198 0.104,0.156 10 false 1 1.781,3.708 1.885,3.865 0.104,0.156 10 false 2 1.802,4.833 1.906,4.99 0.104,0.156 10 false 1 1.792,5.458 1.896,5.615 0.104,0.156 10 false 2 1.792,6.354 1.896,6.51 0.104,0.156 10 false 1 1.792,7 1.896,7.156 0.104,0.156 10 false 2 5.417,5.479 5.823,5.635 0.406,0.156 10 false G142 5.406,6.365 5.813,6.521 0.406,0.156 10 false G142 5.417,7 5.823,7.156 0.406,0.156 10 false G142 4.083,2.813 4.531,2.99 0.448,0.177 10 false TWL+ 4.063,0.854 4.552,1.021 0.49,0.167 10 false TWR+ 4.063,1.719 4.552,1.885 0.49,0.167 10 false TWR-

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

*1: for RH Side

*2: for LH Side


a.

Disconnect the G141 and G142 radio and display receiver assembly connectors.


b.

Disconnect the I1*1 and/or J1*2 front No. 1 speaker assembly connector.


c.

Disconnect the H1*1 and/or H3*2 front No. 2 speaker assembly connector.


d.

Disconnect the K2*1 and/or L2*2 rear speaker assembly connector.


e.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for LH Side:
Tester Connection Condition Specified Condition
G141-2 (FL+) - H3-4 (TWL+) Always Below 1 Ω
G141-6 (FL-) - H3-2 (TWL-) Always Below 1 Ω
H3-3 (+) - J1-1 Always Below 1 Ω
H3-1 (-) - J1-2 Always Below 1 Ω
G142-2 (RL+) - L2-1 Always Below 1 Ω
G142-6 (RL-) - L2-2 Always Below 1 Ω
G141-2 (FL+) - Body ground Always 10 kΩ or higher
G141-6 (FL-) - Body ground Always 10 kΩ or higher
G142-2 (RL+) - Body ground Always 10 kΩ or higher
G142-6 (RL-) - Body ground Always 10 kΩ or higher
H1-3 (+) - Body ground Always 10 kΩ or higher
H1-1 (-) - Body ground Always 10 kΩ or higher
H3-3 (+) - Body ground Always 10 kΩ or higher
H3-1 (-) - Body ground Always 10 kΩ or higher

for RH Side:
Tester Connection Condition Specified Condition
G141-1 (FR+) - H1-4 (TWR+) Always Below 1 Ω
G141-5 (FR-) - H1-2 (TWR-) Always Below 1 Ω
H1-3 (+) - I1-1 Always Below 1 Ω
H1-1 (-) - I1-2 Always Below 1 Ω
G142-1 (RR+) - K2-1 Always Below 1 Ω
G142-3 (RR-) - K2-2 Always Below 1 Ω
G141-1 (FR+) - Body ground Always 10 kΩ or higher
G141-5 (FR-) - Body ground Always 10 kΩ or higher
G142-1 (RR+) - Body ground Always 10 kΩ or higher
G142-3 (RR-) - Body ground Always 10 kΩ or higher
H1-3 (+) - Body ground Always 10 kΩ or higher
H1-1 (-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

2.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.

Disconnec the I1*1 and/or J1*2 front No. 1 speaker assembly connector.

*1: for RH Side

*2: for LH Side



b.

Inspect the front No. 1 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>INSPECTION


Result:
Proceed to
OK
NG



OK

3.CHECK FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

3.CHECK FRONT NO. 2 SPEAKER ASSEMBLY
a.

Replace the front No. 2 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL


b.

Check the malfunction disappears.

HINT:
·

Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.

·

When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.

·

Perform the above inspection on both LH and RH sides.




Result:
Proceed to
Malfunction disappears
Malfunction appears



Malfunction disappears

END (FRONT NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

Malfunction appears

4.INSPECT REAR SPEAKER ASSEMBLY
4.INSPECT REAR SPEAKER ASSEMBLY
a.

Disconnec the K2*1 and/or L2*2 rear speaker assembly connector.

*1: for RH Side

*2: for LH Side



b.

Inspect the rear speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>INSPECTION


Result:
Proceed to
OK
NG



OK

NG