Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › HARD DISK DRIVE › 2012.12–2013.11
RM3090E _56 Audio / Visual / Telematics _008776 NAVIGATION / MULTI INFO DISPLAY _0050611 HARD DISK DRIVE A

NAVIGATION / MULTI INFO DISPLAY  HARD DISK DRIVE  INSTALLATION  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

Precautions for the multi-media module receiver assembly and hard disc.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for HDD)>PRECAUTION


Hide 86271L 2.INSTALL HARD DISC

a.
E270051

Push the hard disc in the direction of the arrow shown in the illustration to install it.


b.
E270050

Install the cover in the direction of the arrow shown in the illustration.


c.

Install the 2 screws.


Hide 83950M 5.INSTALL TELLTALE LIGHT ASSEMBLY

Hide 55670 6.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55680A 7.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55412C 8.INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Hide 9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION