1.REMOVE FRONT DRIVE SHAFT ASSEMBLY
43457
2.REMOVE DRIVE SHAFT BEARING BRACKET
33111Q
3.REMOVE TRANSMISSION CASE OIL SEAL
Using SST, remove the transmission case oil seal.
31105H
4.REMOVE TRANSAXLE CASE OIL SEAL
Using SST, remove the transaxle case oil seal.
33111Q
5.INSTALL TRANSMISSION CASE OIL SEAL
Coat the lip of a new transmission case oil seal with MP grease.
| *a | -0.5 to 0.5 mm (-0.0197 to 0.0197 in.) |
Using SST and a hammer, tap in the transmission case oil seal to the manual transmission case.
-0.5 to 0.5 mm (-0.0197 to 0.0196 in.)
Do not damage the transmission oil seal lip.
31105H
6.INSTALL TRANSAXLE CASE OIL SEAL
Coat the lip of a new transaxle case oil seal with MP grease.
| *a | -0.5 to 0.5 mm (-0.0197 to 0.0196 in.) |
Using SST and a hammer, tap in the transaxle case oil seal to the transaxle case.
-0.5 to 0.5 mm (-0.0197 to 0.0196 in.)
Do not damage the transaxle case oil seal lip.
43457
7.INSTALL DRIVE SHAFT BEARING BRACKET
8.INSTALL FRONT DRIVE SHAFT ASSEMBLY