Home › Engine / Hybrid System › 2WW ENGINE CONTROL › INTAKE AIR TEMPERATURE SENSOR › from 2015.10
RM3090E _51 Engine / Hybrid System _044372 2WW ENGINE CONTROL _0208488 INTAKE AIR TEMPERATURE SENSOR A

2WW ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL INTAKE AIR TEMPERATURE SENSOR

a.
A315747N01
0.49,1.458 0.802,1.656 0.313,0.198 10 false 45°

Insert the intake air temperature sensor and rotate it 45° clockwise to install it.

NOTICE:
·

Avoid physical shock to the intake air temperature sensor.

·

Make sure the intake air temperature sensor is securely installed.




b.

Connect the intake air temperature sensor connector.


Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION