Home › Engine / Hybrid System › 2WW EMISSION CONTROL › DIFFERENTIAL PRESSURE SENSOR › from 2015.10
RM3090E _51 Engine / Hybrid System _044375 2WW EMISSION CONTROL _0210869 DIFFERENTIAL PRESSURE SENSOR A

2WW EMISSION CONTROL  DIFFERENTIAL PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89481B 1.INSTALL DIFFERENTIAL PRESSURE SENSOR

a.

Install the 2 No. 1 vacuum transmitting hoses to the differential pressure sensor.


b.

Connect the 2 No. 1 vacuum transmitting hoses to the exhaust manifold converter sub-assembly.


c.

Using a T20 "TORX" socket wrench, install the differential pressure sensor with the screw.

Torque:
4.0 N*m (41 kgf*cm, 35 in.*lbf)


d.

Connect the differential pressure sensor connector and slide the white-colored lock to engage it securely.