Home › Engine / Hybrid System › 2WW COOLING › THERMOSTAT › from 2015.10
RM3090E _51 Engine / Hybrid System _044377 2WW COOLING _0211207 THERMOSTAT A

2WW COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16331A 1.INSTALL THERMOSTAT

A316621

a.

Align the jiggle valve with the top of the water inlet to install the thermostat.


Hide 16321 2.INSTALL WATER INLET

a.

Install a new gasket to the water inlet.


b.

Temporarily install the water inlet together with the thermostat with the 4 bolts by hand.


c.

Using several steps, uniformly tighten the 4 bolts.

HINT:

Refer to "SPECIFICATIONS - STANDARD BOLT" for the tightening torque.



Hide 16572D 3.CONNECT NO. 2 RADIATOR HOSE

Hide 88310 4.INSTALL COMPRESSOR WITH PULLEY ASSEMBLY (w/ Air Conditioning System)

Hide 51441 7.INSTALL NO. 1 ENGINE UNDER COVER