Home › Engine / Hybrid System › 2WW COOLING › COOLING FAN MOTOR › from 2015.10
RM3090E _51 Engine / Hybrid System _044377 2WW COOLING _0211208 COOLING FAN MOTOR A

2WW COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363A 1.INSTALL NO. 2 COOLING FAN MOTOR

a.

Install the No. 2 cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16363 2.INSTALL COOLING FAN MOTOR

a.

Install the cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16361B 3.INSTALL NO. 2 FAN

NOTICE:

Do not switch the fan and No. 2 fan when installing them. Parts may be damaged if the cooling fans are installed in the wrong locations.


a.
A366762

Install the No. 2 fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)

HINT:

The No. 2 fan has 7 blades.



Hide 16361 4.INSTALL FAN

NOTICE:

Do not switch the fan and No. 2 fan when installing them. Parts may be damaged if the cooling fans are installed in the wrong locations.


a.
A366761

Install the fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)

HINT:

The fan has 9 blades.



Hide 16711 6.INSTALL FAN SHROUD