Home › Drivetrain › EA64 MANUAL TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE › from 2015.10
RM3090E _52 Drivetrain _008755 EA64 MANUAL TRANSMISSION / TRANSAXLE _0050288 TRANSMISSION CONTROL CABLE A

EA64 MANUAL TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  REMOVAL  


PROCEDURE

Hide 17342D 2.REMOVE NO. 2 AIR HOSE

Hide 58901A 3.REMOVE REAR CONSOLE BOX SUB-ASSEMBLY

Hide 33820B 4.DISCONNECT TRANSAXLE CONTROL CABLE ASSEMBLY

C341108C01
3,2.583 2.833,2.583 2.833,2.583 2.75,1.969 true 2.25,2.75 2.083,2.75 2.083,2.75 1.833,1.99 true 2.26,2.667 2.51,2.833 0.25,0.167 10 true *1 3,2.49 3.25,2.656 0.25,0.167 10 true *2
*1 Select Control Cable
*2 Shift Control Cable


a.

Remove the clip and disconnect the cable end of the select control cable from the floor shift shift lever assembly.


b.

Push the ends of the clip apart, and then disconnect the shift control cable from the floor shift shift lever assembly.


c.
C284488C01
0.635,1.448 0.969,1.448 0.969,1.448 1.125,1.135 false 1.938,0.656 2.146,0.344 2.146,0.344 2.427,0.344 false 2.521,0.281 2.833,0.479 0.313,0.198 10 false *1 0.375,1.375 0.688,1.573 0.313,0.198 10 false *2
*1 Cable Lock
*2 Lock Nut


Using a screwdriver, pull out the cable locks of the shift control cable and select control cable.


d.

Rotate the nut clockwise approximately 180° and, while holding the nut in that position, disconnect the shift control cable and select control cable from the floor shift shift lever assembly.

NOTICE:

Do not over-rotate the cable lock as it will come off the internal spring and the transaxle control cable assembly will not be reusable.



e.

Remove the shift control cable from the floor shift shift lever assembly while holding the lock nut.


Hide 33820B 5.REMOVE TRANSAXLE CONTROL CABLE ASSEMBLY

C341110C01
1.5,0.885 1.333,0.417 1.333,0.417 1.167,0.417 false 2.375,3.25 2.208,3.25 2.208,3.25 2.083,3.021 false 1.885,1.177 1.719,1.177 1.719,1.177 1.594,0.948 false 0.958,2.156 0.792,2.156 0.792,2.156 0.667,1.927 false 2.146,4.542 1.979,4.542 1.979,4.542 1.844,4.333 false 1,0.333 1.313,0.49 0.313,0.156 10 false *1 1.938,1.083 2.25,1.24 0.313,0.156 10 false *2 1.01,2.094 1.323,2.25 0.313,0.156 10 false *4 2.417,3.188 2.729,3.344 0.313,0.156 10 false *3 2.198,4.448 2.51,4.604 0.313,0.156 10 false *4
*1 Select Control Cable
*2 Shift Control Cable
*3 Control Cable Bracket
*4 Manual Transaxle Assembly


a.

Remove the 2 clips and disconnect the 2 transaxle control cable assemblies from the manual transaxle assembly.


b.

Remove the 2 clips and disconnect the 2 transaxle control cable assemblies from the control cable bracket.


c.
C341111

Remove the 2 bolts from the retainer.


d.

Pull out the transaxle control cable assembly from the floor.