Home › Engine / Hybrid System › 2WW INTAKE / EXHAUST › EXHAUST MANIFOLD W/ TURBOCHARGER › from 2015.10
RM3090E _51 Engine / Hybrid System _044376 2WW INTAKE / EXHAUST _0210932 EXHAUST MANIFOLD W/ TURBOCHARGER A

2WW INTAKE / EXHAUST  EXHAUST MANIFOLD W/ TURBOCHARGER  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 3.DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

Hide 25051 4.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

Hide 74404A 6.REMOVE BATTERY CLAMP SUB-ASSEMBLY

a.
A365374

Remove the bolt and loosen the nut.


b.

Detach the hook of the battery clamp sub-assembly from the battery carrier assembly, and then remove the battery clamp sub-assembly.


Hide 28899 7.REMOVE BATTERY INSULATOR

Hide 28800 8.REMOVE BATTERY

Hide 74431 9.REMOVE BATTERY TRAY

Hide 74410 10.REMOVE BATTERY CARRIER ASSEMBLY

a.
A365375C01
3.156,1.99 3.156,1.844 3.156,1.844 2.927,1.479 true 3.073,1.99 3.292,2.146 0.219,0.156 10 false *a
*a Ground Wire


Detach the clamp and disconnect the engine wire.


b.

Remove the bolt and disconnect the ground wire from the battery carrier assembly.


c.

Remove the 3 bolts and battery carrier assembly.


Hide 74414B 11.REMOVE BATTERY BRACKET REINFORCEMENT

a.
A365376

Remove the 2 bolts and battery bracket reinforcement.


Hide 17880 12.REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE ASSEMBLY

a.
A365509C01
0.458,0.208 0.656,0.208 0.656,0.208 0.896,0.354 true 1.917,0.208 2.115,0.208 2.115,0.208 2.354,0.354 true 0.281,0.104 0.552,0.323 0.271,0.219 10 false *a 1.74,0.104 2.01,0.323 0.271,0.219 10 false *a
*a Retainer


Detach the clamp and disconnect the mass air flow meter sub-assembly connector.


b.

Detach the clamp and disconnect the vacuum hose from the air cleaner hose assembly.


c.

Detach the clamp and disconnect the No. 1 fuel hose from the air cleaner hose assembly.


d.

Detach the clamp and disconnect the No. 2 fuel hose from the air cleaner hose assembly.


e.

Disconnect the ventilation hose from the cylinder head cover sub-assembly.


f.

Release the retainer and disconnect the air cleaner hose assembly from the turbocharger sub-assembly as shown in the illustration.


g.

Detach the 2 clamps and remove the air cleaner cap sub-assembly with air cleaner hose assembly.


h.

Remove the air cleaner filter element sub-assembly from the air cleaner case sub-assembly.


Hide 13.REMOVE AIR CLEANER CASE SUB-ASSEMBLY

a.
A313618

Remove the 3 bolts and air cleaner case sub-assembly.


Hide 17275A 14.DISCONNECT COMPRESSOR OUTLET ELBOW

a.
A365510C01
0.427,0.177 0.615,0.177 0.615,0.177 0.708,0.365 true 1.927,0.198 2.115,0.198 2.115,0.198 2.208,0.385 true 0.25,0.073 0.563,0.229 0.313,0.156 10 false *a 1.76,0.094 2.073,0.25 0.313,0.156 10 false *a
*a Retainer


Release the retainer and disconnect the compressor outlet elbow from the turbocharger sub-assembly as shown in the illustration.


Hide 15474 15.REMOVE TURBO OIL OUTLET PIPE

a.
A337411

Remove the 3 bolts, turbo oil outlet pipe and gasket.


b.

Remove the O-ring from the turbo oil outlet pipe.


Hide 15481 16.DISCONNECT NO. 1 TURBO OIL PIPE

a.
A337412

Remove the union bolt and 2 gaskets and disconnect the No. 1 turbo oil pipe.


Hide 17.REMOVE NO. 1 EXHAUST MANIFOLD PIPE

a.

Disconnect the exhaust manifold pressure sensor connector.


b.
A337413

Remove the union bolt and 2 gaskets.


c.

Remove the bolt and No. 1 exhaust manifold pipe.


Hide 17201 18.REMOVE TURBOCHARGER SUB-ASSEMBLY

a.
A337414

Disconnect the connector from the turbocharger sub-assembly.


b.

Remove the 4 bolts, turbocharger sub-assembly and gasket.


Hide 19.DISCONNECT ENGINE WIRE

a.
A365511

Remove the 2 bolts and disconnect the engine wire from the No. 1 air tube assembly.


Hide 87246C 20.REMOVE NO. 4 WATER BY-PASS HOSE

a.
A337423C02
0.594,0.302 0.729,0.302 0.729,0.302 0.802,0.698 false 2,0.302 2.135,0.302 2.135,0.302 2.344,0.479 false 0.396,0.208 0.583,0.365 0.188,0.156 10 false *a 1.802,0.208 1.99,0.365 0.188,0.156 10 false *a
*a Retainer


Release the retainer and disconnect the No. 4 water by-pass hose from the EGR cooler assembly as shown in the illustration.


b.

Slide the clamp and remove the No. 4 water by-pass hose from the No. 2 radiator pipe.


Hide 17360A 21.DISCONNECT NO. 1 AIR TUBE ASSEMBLY

a.
A365512

Slide the clamp and disconnect the water by-pass hose assembly from the No. 2 radiator pipe.


b.

Slide the clamp and disconnect the radiator hose sub-assembly from the No. 1 radiator pipe.


c.

Detach the clamp and disconnect the water hose sub-assembly from the compressor outlet elbow.


d.

Slide the clamp and disconnect the water hose sub-assembly from the No. 1 radiator pipe.


e.

Slide the clamp and disconnect the outlet heater water hose from the No. 2 radiator pipe.


f.

Remove the 2 bolts and disconnect the No. 1 air tube assembly from the manual transaxle assembly.


Hide 23801Q 22.DISCONNECT FUEL FEED PIPE SUB-ASSEMBLY

Hide 23.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

Hide 25680 24.REMOVE EGR COOLER ASSEMBLY WITH EGR VALVE ASSEMBLY

Hide 17141 25.REMOVE EXHAUST MANIFOLD

a.
A337417

Remove the 8 nuts and exhaust manifold.


b.

Remove the 2 gaskets from the cylinder head sub-assembly.