Home › Engine / Hybrid System › 2WW STARTING › GLOW PLUG › from 2015.10
RM3090E _51 Engine / Hybrid System _044379 2WW STARTING _0219540 GLOW PLUG A

2WW STARTING  GLOW PLUG  INSTALLATION  


PROCEDURE

Hide 19850 1.INSTALL GLOW PLUG ASSEMBLY

a.
A316914N01
0.677,0.75 0.823,0.469 0.823,0.469 1,0.469 true 1.042,0.375 1.396,0.583 0.354,0.208 10 true SST

Using SST, install the 4 glow plug assemblies.

SST:

PZ4TB-04910-68


Torque:
17.5 N*m (178 kgf*cm, 13 ft.*lbf)


b.

Connect the 4 glow plug assembly connectors.


Hide 82121 2.CONNECT ENGINE WIRE

a.

Using a T25 "TORX" socket wrench, connect the engine wire with the screw.


Hide 4.CONNECT CABLE TO BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION