A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
897A0
1.INSTALL DOOR CONTROL AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY (w/ Tire Pressure Warning System)
Install the door control and tire pressure monitoring system receiver assembly with the bolt.
Connect the connector.
89741
2.INSTALL DOOR CONTROL RECEIVER (w/o Tire Pressure Warning System)
Install the door control receiver with the bolt.
Connect the connector.
62470A
3.INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH
73178A
4.INSTALL SEAT BELT ANCHOR COVER CAP
64730J
5.INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH
64718A
6.INSTALL DECK TRIM SERVICE HOLE COVER
62331C
7.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure described for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
67917C
8.INSTALL REAR DOOR SCUFF PLATE RH
Use the same procedure described for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
9.INSTALL REAR SEAT ASSEMBLY
58577E
10.INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE
64716P
11.INSTALL REAR DECK TRIM COVER (for Full Size Spare Tire)
58386
12.INSTALL REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)
58416K
13.INSTALL REAR NO. 2 FLOOR BOARD
Use the same procedure described for the No. 3 rear floor board side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
58410B
14.INSTALL DECK BOARD ASSEMBLY
64910N
15.INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
64309A
16.INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)